• +41 (0)32 332 20 00
  • info@hormec.com

Automatic device to lubricate the barrels

Graissage barillets

Automatic feeding of the barrels
Standard tray, type A5, for 100-250 pieces
System Pick & Place
■ Horizontal Servo slider with double outlet on the PN precision slider
■ Work piece presence detection by vacuum
■ Suction nozzles with integrated centring and vacuum control

Dosing system
■ Volumetric dosing, type G2-VR-1-SER with double module Ø1 mm
■ Interchangeable grease supply cartridge
■ Temperature control system (Peletier) for the grease to ensure a constant tempera-ture
■ Laser control system for the removal of the cord
■ Automatic cleaning of the dosing needle
■ Beckhoff electronic control and pneumat-ic for managing the entire cell
Technical specifications
Cycle: 20-50 pieces / minute

 

Manual machine to grease the casings of the barrel

Graissage tambours

Volumetric lubrication of a cord on the in-side of the drum barrel
■ Manual feeding of the barrel
■ Work piece detection system by vacuum

Dosing system
■ Volumetric dosing type G2-VR-1-SER with dual module Ø1mm
■ Interchangeable grease supply cartridge
■ Temperature control system (Peletier) of the grease to ensure a constant tempera-ture
■ Visual inspection of the removal of the cord
■ Electronic control
Options
■ Automatic cleaning of the dosing needle
Technical specifications
Cycle time: 3-4 sec. / piece

 

Lubrication unit for the anchor wheel

Escapmat 11127-000

Unit designed for lubrication of the escape wheel. This method has the following ad-vantages:
Features
■ Suppression of the spreading of oil on the anchor, pallets and the board of the escape wheel.
■ Better adhesion of the grease on the greasing points.
■ Homogeneous distribution of the grease.
■ Ability to determine the number of teeth to grease using the frequency of dosing impulses.
■ Rapid calibre change thanks pinned work piece carrier.
■ Possible adaptation to automated as-sembly lines of all the types.

Techniques specifications
Cycle time: 3 sec. per greased tooth.